NEW! Hybrid Bulkhead

Machined from Billet 6061
aluminum
Eliminates stock bulkhead and Diff
case by combining into one unit
Eliminates chassis support at TVP
mount
Eliminates bulkhead brace
Superior strength
Weighs 191 grams
Includes all necessary mounting
hardware
Accepts stock gears with no
modification

front or rear

$60.00 each
NEW! Extended Arm Conversion

Machined from Billet 6061
aluminum Extended .500" for
improved handling Extra hole was
added for shock position.
Includes all 6 EXT. Dogbones and
cups for a bulletproof driveline!
Lifetime warranty on drive shafts
Kit includes everything pictured
along with mounting hardware
Not pictured Extended Upper Arms

$150.00 full kit
NEW!  Low Center of Gravity TVP

Machined from Billet 6061
aluminum
4.7mm (.187") thick for extreme
abuse
.500 lower center of gravity
Drilled for center skid plate
Separate kits available for inline
throttle, servo mount, fuel tank
relocation and center skid plate
Also includes FLM45700 Motor
Plate
Will not work with Rotosart
requires modification

$56.00 set
Adjustable Upper Control Arms

Infinite adjustments
Machined from Billet 6061
aluminum and high strength steel
Enhances looks by Looking like an
arm and not a stick like the stock
piece

$27.00
NEW Design!

Adjustable Lower Control Arms

We added some more material to
the center section for increased
strength
Machined from Billet 6061
aluminum
Works well with stock, T-maxx, LST
and after market shocks

$30.00 pair
NEW! Extended Low Center of
Gravity TVP

Machined from Billet 6061
aluminum
4.7mm (.187") thick for extreme
abuse
.500 lower center of gravity
Extended 40mm
Drilled for center skid plate
Drive shaft with lifetime warranty  
Separate kits available for inline
throttle and steering servo mount,
fuel tank relocation and center
skid plate

$60.00 set
Aluminum Diff Cup

Machined from Billet 6061 aluminum
Ready for a 4 spider set-up



$18.00
Super Duty Twin Vertical Plates

Machined from Billet 6061
aluminum
4.7mm (.187") thick for extreme
abuse
Machined pockets for lightweight


$45.00 set
NEW! Servo Plate Kit

Machined from Billet 6061 aluminum
Eliminates the stock servo/battery
box Extra holes to mount 1/8 scale
buggy style fuel tanks
Lightweight Designed to fit our
TVP's (will also work on stock TVP
with modification)


$15.00
NEW! Center Skid Plate

Machined from Billet 6061
aluminum
Protects Tranny and brake disc

Designed to fit our  Low Center of
Gravity TVP's

$12.00
NEW! Servo Mounts

Machined from Billet 6061
aluminum
Mounts Servo to TVP's
Includes all necessary hardware


$7.00
NEW! Motor Plate

Machined from Billet 6061 aluminum
Replaces stock motor plate
Includes all necessary hardware



$11.00  
NEW! Steering Brace

Machined from Billet 6061 aluminum
Replaces stock brace
Includes all necessary hardware


$7.50
NEW! TVP Brace

Machined from Billet 6061
aluminum
Replaces plastic brace
Includes all necessary hardware
M3 X .5 tapped holes


$3.00
Best Parts,
Best Warranty,
Fast Secure
Payments,
Fast - Cheap
Shipping
NEW! Extended Center Skid Plate

Machined from Billet 6061
aluminum
Protects Tranny and brake disc

Designed to fit our Extended Low
Center of Gravity TVP's

$12.00
Adjustable Shock Towers

We added some an extra holes along with
an extra .500 adjustment for lowering
Machined from Billet 6061 aluminum.
Works great with virtually every shock
available

Does not accept Savage X front bumper,
although will work with modification or
the use of FLM Bulk and Ext A-Arms


$24.00 each
Package Deals
LOCTITE Everything
up to 25 screws/bottle
Only $3.00
Bearings can rotate up to 49,000
rpm. Each bearing has 2 Teflon
Seals to protect the bearing from
dust or any possible contamination.
Bearings are pre-lubricated, with
grease, making these bearing ideal
for hard-core applications. Direct fit
for Hybrid Bulkheads. Each Set
includes 4 bearings good for ONE
bulk

$35/set
Check out the Package Deal on
Bulks, Diff Cups, and Bearings.
All for one Low Price

Click Here!
Get it Anodized!
Click here for details
Black Anodized Extended Low
Center of Gravity TVP's NOW IN
STOCK!!!



$72.50
Black Anodized Super Duty Twin
Vertical Plate NOW IN STOCK!!!




$57.50
Black Anodized Low Center of
Gravity TVP NOW IN STOCK!!!




$68.50
Black Anodized Extended Arm
Conversion NOW IN STOCK!!!!


$175.00
Savage Motor Mount



$20.00
NEW! E-Savage Nitro Conversion

Convert your Nitro Savage to an
Electric Savage and take advantage
of the ease of use and incredible
performance of today's Brushless
Motors

Kit Requires the purchase of an
E-Savage Transmission and Motro/ESC
Works with all Nitro Savage Parts

$100
LST shock conversion

This set allows Losi LST shocks to
be used on your savage with FLM
shock towers.

You will need one set per 2 shocks

$18.00
All parts are Savage XL Ready!
Savage Lower Arm Brace

$7.50
Savage HD Front Drive Shaft



Machined from Carbon Steel and
Heat Treated


$7.50/shaft